Customers using a HETAS Registered Installer in England and Wales will be given a HETAS Certificate of Compliance by the installer on the completion of installation work. This is vital importance in demonstrating that the installation was carried out by a competent installer working for a HETAS registered business and complies with the relevant Building Regulations. The information on the certificate is used to record your installation, and in England & Wales it is used to notify your Local Authority Building Control Department (LABC) of the work that was undertaken. This ‘self certification’ by competent registered installers takes the place of a Local Authority Building Notice which could cost you a significant amount of money (sometimes up to £300). The HETAS installer is charged a small fee by HETAS for this service, but much less than the charges incurred if you seek a Building Notice via the Local Authority. The information is required to validate household insurance and will be required by Solicitors in any home selling process. Failure to notify the Local Authority (the process differs in Scotland), can be an offence resulting in enforcement action being taken against the Householders and/or the installer, this could cost anything up to £5000. Regulations vary by regions, consumers in Scotland, Northern Ireland, Republic of Ireland and Isle of Man should contact their relevant Local Authority prior to commencing any installation work.
The HETAS Certificate of Compliance must be completed and signed only by the HETAS Registered Installer who undertook the work. The white copy of the fully completed and signed Certificate must be returned to HETAS Ltd at the address shown at the bottom of the Certificate within 7 days of the completion date of the works. HETAS will then process the information provided on the Certificate for submission to the relevant Local Authority within 30 days of the completion of the works as required by the Building Regulations (a legal requirement).
If the HETAS Ltd Certificate of Compliance is not provided, is not completed correctly or the Certificate is returned late then there will be no notification of the work to the Local Authority by HETAS. This would in fact mean that the law has not been complied with and can cause difficulties when selling a property and potentially void a household insurance policy.
Where a hearth, fireplace, flue or chimney is provided as part of the work information essential to the correct application and use of these facilities should be permanently posted in the building. A way of meeting this requirement is for the installer to provide a Notice (or Data) plate. In addition customers should also receive an instruction manual for the appliance that has been installed
Please note that these picture are a selection taken from many jobs, during work in progress and therefore may not be complete.
They will give you an idea of what insulated flues can do for you and thier application.
If you have any questions regarding these pictures please contact us.
Here are a selection of pictures taken during installations, please bear in mind that many of these are work in progress and will give you a good idea of some of the many jobs we do.
Get in touch at:
Country Stoves of Sibsey
The Forge Frithville Rd
Boston PE22 0SP
Tel: 01205 751133
We're also available via our contact form.
Chimney Sweep Booking
Please Call Kerry on 01205 751133 or fill in your details on the contact form and we will call you back with the next availble date.
Phone calls taken 8:45 - 20:00
Appointment Availability: 2 Days. Book now for the next available dates.
Show room open for stove viewing: